Продукция компании состоит из: электрошокер, стекло в душе, полый стакан, стальное стекло.

продукц

все
продукц
новост

продукц

Papua New Guinea Панель холодильника

Панель холодильника Цвет: черный, зеленый, фиолетовый и т. д., цвет можно настроить Толщина: 3 - 6 мм Размер должен быть больше: 50 * 300 мм Размер должен быть меньше: 1000 * 1600 мм Пакер: деревянный ящик Это хороший пример. Стекло закаленное, безопасный угол

Category:

Papua New GuineaСтекло для бытовой техники

Papua New Guineaпанель холодильника

info@msatglass.com

Inquire

Product Description

Refrigerator glass panels, after multiple printings, the printed patterns and strokes are clear without exposed bottoms and impurities, without burrs and gaps on the edges, straight lines, no jagged, three-dimensional, good adhesion, not easy to fall off, and on the printed surface At the same time, the coating treatment improves the corrosion resistance and non-conductivity of the glass panel; through tempering, the strength of the glass panel is improved.

process characteristics

(1) Cutting and edging: cut the glass to the required size and then perform edging;
(2) Cleaning: Clean until the glass surface is free of dirt, water stains and water droplets;
(3) Drilling and tempering: the cleaned glass is drilled and placed in a tempering furnace for tempering; the tempering conditions are: the upper heating temperature is 700-720°C, the lower heating temperature is 690-710°C, and the heating time is 115-135s, extreme cold time is 10-14s;
(4) Printing: Printing is divided into multiple times by screen printing, drying and cleaning after each printing;
(5) Packaging inspection: Cover the product completely with copy paper, then pack it with pearl cotton, and finally separate it with foam.