Продукция компании состоит из: электрошокер, стекло в душе, полый стакан, стальное стекло.

продукц

все
продукц
новост

Главная страница

Панель холодильника

Панель холодильника Цвет: черный, зеленый, фиолетовый и т. д., цвет можно настроить Толщина: 3 - 6 мм Размер должен быть больше: 50 * 300 мм Размер должен быть меньше: 1000 * 1600 мм Пакер: деревянный ящик Это хороший пример. Стекло закаленное, безопасный угол

Categories：

Стекло для бытовой техники

поддержива:

Refrigerator glass panels, after multiple printings, the printed patterns and strokes are clear without exposed bottoms and impurities, without burrs and gaps on the edges, straight lines, no jagged, three-dimensional, good adhesion, not easy to fall off, and on the printed surface At the same time, the coating treatment improves the corrosion resistance and non-conductivity of the glass panel; through tempering, the strength of the glass panel is improved.

process characteristics

(1) Cutting and edging: cut the glass to the required size and then perform edging;
(2) Cleaning: Clean until the glass surface is free of dirt, water stains and water droplets;
(3) Drilling and tempering: the cleaned glass is drilled and placed in a tempering furnace for tempering; the tempering conditions are: the upper heating temperature is 700-720°C, the lower heating temperature is 690-710°C, and the heating time is 115-135s, extreme cold time is 10-14s;
(4) Printing: Printing is divided into multiple times by screen printing, drying and cleaning after each printing;
(5) Packaging inspection: Cover the product completely with copy paper, then pack it with pearl cotton, and finally separate it with foam.